Leaders in Learning: Publications of Faculty & Staff


 Mechanical & Materials Engineering: 1999-2000

 

BUCHAL, R.O.

Kopp, G.A., and R.O. Buchal. 2000. Engineering Graphics in the New Millennium: Integrating the Strengths of Sketching and CAD. 2000 Annual Conference of the Canadian Society for Civil Engineering. London, Ontario: 7 June 2000-10 June 2000. CSCE. 8-15.

Sky, R.W.E., and R.O. Buchal. 1999. Modeling and Implementing Concurrent Engineering in a Virtual Collaborative Environment. Concurrent Engineering: Research and Applications 7 (4): 279-289.

 

FENG, H.Y.

Andrewes, J.E.C., H.Y. Feng, and W.M. Lau. 2000. Machining of an Aluminum/SiC Composite Using Diamond Inserts. Journal of Materials Processing Technology 102: 25-29.

Chen, C., and H.Y. Feng. 2000. Constrained B-Spline Curve Fitting in Reverse Engineering. IDMME'2000: 3rd International Conference on Integrated Design and Manufacturing in Mechanical Engineering. Montreal, Canada: 16 May 2000-19 May 2000. C. Mascle, C. Fortin, and J. Pegna. Presses internationals Polytechnique.

Feng, H.Y., and H. Li. 2000. NC Tool Path Planning for Sculptured Surface Machining Based on Constant Scallop Height. Transactions of NAMRI/SME, Vol. XXVI. Lexington, Kentucky: 24 May 2000-26 May 2000. 377-382.

Feng, H.Y., and N. Su. 1999. Cutting Force Modeling and Optimization in 3D Plane Surface Machining. The 1999 ASME International Mechanical Engineering Congress and Exposition, Vol. 10. Nashville, Tennessee: 14 November 1999-19 November 1999. Manufacturing Science and Engineering. 337-343.

Feng, H.Y., and N. Su. 2000. Integrated Tool Path and Feed Rate Optimization for the Finishing Machining of 3D Plane Surfaces. International Journal of Machine Tools and Manufacture 40 (11): 1557-1572.

Xi, F., Y. Liu, and H.Y. Feng. 2000. Error Compensation for the 3D Line Laser Scanning Data. Intelligent Computation in Manufacturing Engineering - 2: Proceedings of the 2nd CIRP International Seminar on Intelligent Computation in Manufacturing Engineering. Capri, Italy: 21 June 2000-23 June 2000. R. Teti. 275-280.

 

FLORYAN, J.M.

Hamed, M., and J.M. Floryan. 1999. Marangoni Convection. Part 1. A cavity with differentially heated sidewalls. Journal Fluid Mechanics 405 (Oct.): 79-110.

Hamed, M., and J.M. Floryan. 1999. Marangoni Convection. Part 2. A cavity subject to point heating. Journal Fluid Mechanics 405 (Oct.): 111-129.

Szumbarski, J.J., and J.M. Floryan. 1999. Channel Flow Instability in Presence of Weak Distributed Surface Suction. AIAA Journal 38 (2): 372-374.

Szumbarski, J.J., and J.M. Floryan. 1999. A Direct Spectral Method for Determination of Flows over Corrugated Boundaries. Journal of Computational Physics 153: 378-402.

 

JOHNSON, J.A.

Danter, M.R., G.J.W. King, D.G. Chess, J.A. Johnson, and K.J. Faber. 2000. The Effect of Cement Restrictors on the Occlusion of the Humeral Canal. The Journal of Arthroplasty 15 (1): 113-120.

Dunning, C.E., C.S. Lindsay, R.T. Bicknell, S.D. Patterson, J.A. Johnson, and G.J.W. King. 1999. Supplemental Pinning Improves the Stability of External Fixation in Distal Radius Fractures During Simulated Finger and Forearm Motion. The Journal of Hand Surgery 24(A) (5): 992-1000.

Johnson, J.A., D.A. Rath, C.E. Dunning, S.E. Roth, and G.J.W. King. 2000. Simulation of elbow and forearm motion in vitro using a load controlled testing apparatus. Journal of Biomechanics 33: 635-639.

King, G.J.W., Z.D.S. Zarzour, D.A. Rath, C.E. Dunning, S.D. Patterson, and J.A. Johnson. 1999. Metallic Radial Head Arthroplasty Improves Valgus Stability of the Elbow. Clinical Orthopaedics and Related Research 368: 114-125.

 

KHAYAT, R.E.

Ashrafi, N., and R.E. Khayat. 2000. A low-dimensional approach to nonlinear plane-Couette flow of viscoelastic fluids. Physics of Fluids 12 (1): 1-21.

Ashrafi, N., and R.E. Khayat. 2000. Shear-thinning-induced chaos in Taylor-Couette flow. Physical Review E 61 (2): 1455-1467.

Bourry, D., F. Godbille, R.E. Khayat, A. Luciani, J. Picot, and A. Utracki. 1999. Extensional Flow of Polymeric Dispersions. Polymer Engineering and Science 39 (6): 1072-1086.

Khayat, R.E. 1999. A Boundary Element Analysis of Multiply Connected Three-Dimensional Cavity Mixing Flow of Polymer Solutions. International Journal for Numerical Methods in Fluids 31: 1173-1194.

Khayat, R.E. 1999. A boundary-only approach to the deformation of a shear-thinning drop in extensional Newtonian flow. International Journal for Numerical Methods in Fluids 33: 559-581.

Khayat, R.E. 1999. Finite-amplitude Taylor-vortex flow of viscoelastic fluids. Journal of Fluid Mechanics 400: 33-58.

Khayat, R.E. 2000. Transient free-surface flow inside thin cavities of viscoelastic fluids. Journal of Non-Newtonian Fluid Mechanics 91: 15-29.

Khayat, R.E., A. Luciani, L.A. Utracki, F. Godbille, and J. Picot. 2000. Influence of shear and elongation on drop deformation in convergent-divergent flows. International Journal of Multiphase Flow 26: 17-44.

Khayat, R.E., and K. Marek. 1999. An adaptive boundary-element approach to 3D transient free-surface flow of viscous fluids. Engineering Analysis with Boundary Elements 23: 111-122.

Verron, E., R.E. Khayat, A. Derdouri, and B. Peseux. 1999. Dynamic inflation of hyperelastic spherical membranes. Journal of Rheology 43 (5): 1083-1097.

 

KNOPF, G.K.

Dickinson, J.K., and G.K. Knopf. 1999. A moment based metric for 2-D and 3-D packing. European Journal of Operational Research 122: 133-144.

Knopf, G.K., A.S. Bassi, S. Singh, and R. Macleod. 1999. Biosensor for remote monitoring of airborne toxins. SPIE Conference Environmental Monitoring and Remediation Technologies II. Boston, MA : 20 September 1999-22 September 1999. T. Vo-Dinh, and R.L. Spellicy. SPIE Proceedings Series, Vol. 3853. Bellingham, Washington: SPIE: The International Society for Optical Engineering. 185-193.

Knopf, G.K., and J. Kofman. 1999. Free-form surface reconstruction using Bernstein basis function networks. Smart Engineering Design: Neural Networks, Fuzzy Logic, Evolutionary Programming, Data Mining, and Complex Systems. Proceedings of the Artificial Neural Networks in Engineering Conference (ANNIE'99), Vol. 9. St. Louis, Missouri: 7 November 1999-10 November 1999. C.H. Dagli, A.L. Buczak, J. Ghosh, M.J. Emrechts, and O. Ersoy. New York: ASME Press. 797-802.

Knopf, G.K., and J. Kofman. 1999. Multisensor fusion for geometric-part inspection. Sensors and Controls for Intelligent Machining and Manufacturing. Boston, MA: 19 September 1999-20 September 1999. G.K. Knopf, P.F. Muir, and P.E. Orban. SPIE Proceedings Series, Vol. 3832. Bellingham, Washington: SPIE: The International Society for Optical Engineering. 90-101.

Knopf, G.K., and J. Kofman. Point correspondences between successive range views using localized spin images. Intelligent Robots and Computer Vision XVIII: Algorithms, Techniques, and Active Vision. Boston, MA: 20 September 1999-21 September 1999. D.P. Casasent. SPIE Proceedings Series, Vol. 3837. Bellingham, Washington: SPIE: The International Society for Optical Engineering. 289-298.

Knopf, G.K., P.F. Muir, and P.E. Orban. (Editors). 1999. Sensors and Controls for Intelligent Machining and Manufacturing. Boston, MA: 19 September 1999-20 September 1999. SPIE Proceedings Series, Vol. 3832. Bellingham, Washington: SPIE: The International Society for Optical Engineering.

Knopf, G.K., and A. Sangole. 1999. Isolating exchange errors in STEP data files using manifold solid to surface mapping. Advances in Concurrent Engineering CE99. The 6th ISPE International Conference on Concurrent Engineering: Research and Applications. Bath, U.K.: 1 September 1999-3 September 1999. P.K. Chawdhry, P. Ghodous, and D. Vandorpe. Lancaster, PA: Technomic Publishing Co. Inc. 293-302.

Sangole, A., G.K. Knopf, and H. Mak. 1999. Micro geometry flaws in the exchange of design data using STEP. Journal of Concurrent Engineering: Research and Applications 7 (4): 336-345.

 

LIU, Y.

Xi, F., Y. Liu, and H.Y. Feng. 2000. Error Compensation for the 3D Line Laser Scanning Data. Intelligent Computation in Manufacturing Engineering - 2: Proceedings of the 2nd CIRP International Seminar on Intelligent Computation in Manufacturing Engineering. Capri, Italy: 21 June 2000-23 June 2000. R. Teti. 275-280.

 

MECHEFSKE, C.M.

Chen, Z., and C.M. Mechefske. 1999. Machine Condition Monitoring Based on Transient Vibration Signal Analysis. Proceedings of the 6th International Congress on Sound and Vibration, Vol. 6. Copenhagen, Denmark: 5 July 1999-8 July 1999. F. Jacobsen. 2951-2958.

Chen, Z., and C.M. Mechefske. 2000. Machine Fault Diagnosis: Application of the Prony Method. Proceedings of the 18th Machinery Vibration Seminar. Halifax, Nova Scotia: 27 April 2000-29 April 2000. Canadian Machinery Vibration Association. 117-124.

Chen, Z., and C.M. Mechefske. 2000. A Numerical Comparison of Model Order Selection Criteria Performance. ISMME'2000: 3rd International Conference on Integrated Design and Manufacturing in Mechanical Engineering, Forum 2000. 16 May 2000-19 May 2000. C. Mascle, C. Fortin, and J. Pegna. Montreal, Quebec: CSME (Canadian Society of Mechanical Engineers). 234.

Wang, Z., and C.M. Mechefske. 2000. Justifying Condition Monitoring: A Fuzzy Linguistic Approach. Proceedings of the18th Machinery Vibration Seminar. Halifax, Nova Scotia: 27 April 2000-29 April 2000. Canadian Machinery Vibration Association. 59-68.

Wu, Y., C. Bowen, C.M. Mechefske, and B.K. Rutt. 2000. Effect of Trapezoid Gradient Flat-top Width on Acoustic Noise and Magnetic Field Oscillations in MR Imagers. The International Society of Magnetic Resonance in Medicine (ISMRM) Conference. Denver, CO: 1 April 2000-7 April 2000. ISMRM. 337.

Wu, Y., C. Bowen, C.M. Mechefske, and B.K. Rutt. 2000. Experimental Study of Gradient Coil Acoustic/Magnetic Frequency Response Functions on a 4T Whole Body Imager. The International Society of Magnetic Resonance in Medicine (ISMRM) Conference. Denver, CO: 1 April 2000-7 April 2000. ISMRM. 1371.

Xi, F., and C.M. Mechefske. 2000. Integrated Development of Re-Configurable Lightweight Parallel Mechanisms. IDMME'2000: 3rd International Conference on Integrated Design and Manufacturing in Mechanical Engineering. 16 May 2000-19 May 2000. C. Mascle, C. Fortin, and J. Pegna. Montreal, Quebec: Canadian Society for Mechanical Engineering. 239.

Xi, F., and C.M. Mechefske. 2000. An Integrated System for Development of Lightweight Hexapods. Proceedings of the 2000 NSF Design and Manufacturing Research Conference. Vancouver, B.C.: 3 January 2000-6 January 2000.

Zaza, C., M.S. Fleiszer, F.W. Maine, and C.M. Mechefske. 2000. Beating Injury With A Different Drumstick: A Pilot Study. Medical Problems of Performing Artists 15 (1): 39-44.

 

SHEASBY, J.S.

Sheasby, J.S., M.C. Jennings, and K.D. Cassells. 1999. The effect of sample spin on boundary lubrication by several oil blends based upn zinc dialkyldithiophosphates. Wear 231: 256-264.

 

SHINOZAKI, D.M.

Shinozaki, D.M., and Y. Lu. 2000. On the measurement of Polymer Inelastic Properties Using Microindentation. 11th International Conference on Deformaton, Yield and Fracture of Poymers. London, England: 10 April 2000-13 April 2000. IOM Communications Ltd. 187-190.

Yan, R.J., A. Ajji, D.M. Shinozaki, and M.M. Dumoulin. 2000. Uniaxial drawing behavior of syndiotactic polystyrene. Polymer 41 (April): 1077-1086.

 

SINGH, A.V.

Singh, A.V. 1999. Free vibration analysis of deep doubly curved sandwich panels. Computers and Structures 73: 385-394.

Singh, A.V. 2000. Linear and geometrically nonlinear vibrations of fiber reinforced laminated plates and shallow shells. Computers and Structures 76: 277-285.

Singh, A.V., and K. Lan. 1999. Numerical Procedure for the Nonlinear Free Vibration Analysis of Shallow Shell Defined by a Quadrilateral Domain. Proceedings of the 2nd International Symposium on Vibrations of Continuous Systems. Grindelwald, Switzerland: 11 July 1999-16 July 1999. 65-67.

Singh, A.V., and Y. Zheng. 2000. Stochastic Finite Element Methods: A Brief Review with Analysis. Advances in Structural Engineering. Proceedings of the Second Structural Engineering Convention (SEC - 2000). Bombay, Powai, Mumbai: 5 January 2000-8 January 2000. Y. Desai, T. Kant, and A. Mukherjee. Mumbai: Quest Publications. 367-375.

 

STRAATMAN, A.G.

Straatman, A.G. 1999. A Modified Model for Diffusion in Second-Moment Turbulence Closures. Journal of Fluids Engineering 121 (Dec.): 747-756.

Straatman, A.G. 1999. On the development of a computational method for modelling turbulent mixing in sharply stratified flows. International Journal of Heat and Fluid Flow 20: 385-394.

Yang, A., A.G. Straatman, and E.K. Yanful. 2000. Experimental Study on Wind Induced Motions and Sediment Resuspension in Shallow Water. 6th Environmental Engineering Specialty Conference of the CSCE & 2nd Sping Conference of the Geoenvironmental Divison of the Canadian Geotechnical Society. London, Ontario: 7 June 2000-10 June 2000. 177-182.

Yang, Y., A.G. Straatman, and E.K. Yanful. 2000. Sediment re-suspension in shallow water under wind-induced waves and current. Environmental Issues and Managment of Waste in Energy and Mineral Production: Proceedings of the Sixth International Conference on Environmental Issues and Management of Waste in Energy and Mineral Production. Calgary, AB: 30 May 2000-2 June 2000. R.K. Singhal, and A.K. Mehrotra. Rotterdam: A.A. Balkema. 527-530.

 

YAN, R.J.

Yan, R.J., A. Ajji, D.M. Shinozaki, and M.M. Dumoulin. 2000. Uniaxial drawing behavior of syndiotactic polystyrene. Polymer 41 (April): 1077-1086.

 

ZHANG, C.

Xu, H., and C. Zhang. 2000. Numerical Calculations of Laminar Flows Using Contravariant Velocity Fluxes. Computers and Fluids 29: 149-177.

Zhang, C., T. Ishii, Y. Hino, and S. Sugiyama. 2000. The Numerical and Experimental Study of Non-premixed Combustion Flames in Regenerative Furnaces. Journal of Heat Transfer 122 (2): 287-293.