Leaders in Learning: Publications of Faculty & Staff


 Mechanical & Materials Engineering: 1998-1999

 

BUCHAL, R.O.

Buchal, R.O., and G. Iakovidis. 1998. Development of a Virtual Collaboration Environment for Concurrent Product Developmet using the Internet. Proceedings of the Tenth International IFIP WG 5.2/5.3 Conference PROLAMAT 98. Trento, Italy: 9 September 1998-11 September 1998. CD ROM.

 

FENG, H.Y.

Feng, H.Y. 1998. A Rugged and Reliable System for Measuring Engine Crankshaft Speed Fluctuations. Journal of Dynamic Systems, Measurement, and Control 120 (4): 533-536.

Feng, H.Y., and N. Su. 1999. Determination of Cut Geometry in 3-D Finishing Ball-end Milling. Proceedings of the 17th Canadian Congress of Applied Mechanics: CANCAM 99: Symposium on Manufacturing, Robotics and Automation. Hamilton, Ontario: 30 May 1999-3 June 1999. S. Ziada, and D.S. Weaver. 359-360.

 

FLORYAN, J.M.

Hamed, M.S., and J.M. Floryan. 1998. Numerical Simulation of Unsteady Nonisothermal Capillary Interfaces. Journal of Computational Physics 145: 110-140.

Roberts, P.J.D., and J.M. Floryan. 1999. Stability of Boundary Layers with Non-Uniform Suction. Canadian Aeronautics and Space Institute 46th Annual Conference Proceedings. Montreal, Quebec: 3 May 1999-5 May 1999. 377-378.

Rokicki, J., and J.M. Floryan. 1999. Higher-Order Unstructured Domain Decomposition Method for Navier-Stokes Equations. Computers & Fluids 28: 87-120.

Shahin, G.A., and J.M. Floryan. 1999. Heat Transfer Enhancement Generated by the Chimney Effect in Systems of Vertical Channels. Journal of Heat Transfer 121 (Feb.): 230-232.

Szumbarski, J.J., and J.M. Floryan. 1999. Flow Control Using Distributed Surface Suction and/or Surface Vibrarions. Canadian Aeronautics and Space Institute 46th Annual Conference Proceedings. Montreal, Quebec: 3 May 1999-5 May 1999. 367-376.

Szumbarski, J.J., and J.M. Floryan. 1999. Flow Modifications Using Distributed Suction. 37th AIAA Aerospace Sciences Meeting and Exhibit. Reno, NV: 11 January 1999-14 January 1999. Reston, VA: American Institute of Aeronautics and Astronautics. 1-13.

Szumbarski, J.J., and J.M. Floryan. 1998. Flow Modifications Using Distributed Surface Suction. Thirteenth Australasian Fluid Mechanics Conference, Vol. 1. Melbourne, Australia: 13 December 1998-18 December 1998. M.C. Thompson, and K. Hourigan. Monash University. 511-514.

 

KHAYAT, R.E.

Ashrafi, N., and R.E. Khayat. 1999. Nonlinear Stability analysis of Plane-Couette Flow of Viscoelastic Fluids. Proceedings 17th Canadian Congress of Applied Mechanics - CANCAM 99. Hamilton, Ontario: 30 May 1999-3 June 1999. S. Ziada, and D.S. Weaver. McMaster University. 183-184.

Khayat, R.E. 1998. Boundary element analysis of planar drop deformation in confined flow. Part II. Viscoelastic fluids. Engineering Analysis With Boundary Elements 22: 291-306.

Khayat, R.E. 1998. Emergence of nonlinear dynamics in 3D cavity mixing of linear fluids. Boundary Elements XX. International Series on Advances in Boundary Elements, Vol. 4. A. Kassab, M. Chopra, and C.A. Brebbia. Southampton, UK: Computational Mechanics Publications. 471-480.

Khayat, R.E. 1999. Low-Dimensional Description of Viscoelastic Taylor-Vortex Flow. Advances in the Flow and Rheology of Non-Newtonian Fluids, Part B. D.A. Siginer, D. De Kee, and R.P. Chhabra. New York: Elsevier. 301-330.

Khayat, R.E. 1998. A three-dimensional boundary element approach to confined free-surface flow as applied to die casting. Engineering Analysis With Boundary Elements 22: 83-102.

Khayat, R.E., A. Derdouri, and D. Frayce. 1998. Boundary Element Analysis of Three-Dimensional Mixing Flow of Newtonian and Viscoelastic Fluids. International Journal for Numerical Methods in Fluids 28: 815-840.
.

Khayat, R.E., and K. Marek. 1999. An adaptive boundary-element approach to 3D transient free-surface flow of viscous fluids. Engineering Analysis With Boundary Elements 23: 111-122.

Khayat, R.E., and P. Raducanu. 1998. A Coupled Boundary/Finite-Element Approach for the Three-Dimensional Simulation of Air Venting in Blow Molding and Thermoforming. International Journal for Numerical Methods in Engineering 43: 151-174.

Zhang, J., and R.E. Khayat. 1999. An Adaptive Boundary Element Approach to Free Surface Flow As Applied to Gas-Assisted Injection Molding. Proceedings 17th Canadian Congress of Applied Mechanics - CANCAM 99. Hamilton, Ontario: 30 May 1999-3 June 1999. S. Ziada, and D.S. Weaver. McMaster University. 209-210.

 

KNOPF, G.K.

Dickinson, J.K., and G.K. Knopf. 1998. Generating 3D Packing Arrangements For Layered Manufacturing. Proceedings of the International Conference on Agile, Intelligent and Computer-Integrated Manufacturing Systems. Troy, New York: 7 October 1998-8 October 1998. Rensselaer Polytechnic Institute. 1-13. CD ROM.

Dickinson, J.K., and G.K. Knopf. 1998. Serial packing of arbitrary 3D objects for optimizing layered manufacturing. Intelligent Robots and Computer Vision XVII: Algorithms, Techniques, and Active Vision. Boston, Massachusetts: 2 November 1998-3 November 1998. D.P. Casasent. SPIE Proceedings, Vol. 3522. SPIE. 130-138.

Knopf, G.K. 1998. Data fusion using a hierarchy of self-organizing feature maps. Sensors and Controls for Intelligent Machining, Agile Manufacturing, and Mechatronics. Boston, Massachusetts: 4 November 1998-5 November 1998. P.F. Muir, and P.E. Orban. SPIE Proceedings, Vol. 3518. SPIE - The International Society for Optical Engineering. 6-16.

Knopf, G.K. 1999. Dynamic scene analysis using imprecise information. Proceedings of 5th International Conference on Quality Control by Artificial Vision [IMS-HUTOP Session]. Trois Riviere, PQ: 19 May 1999-21 May 1999. 24-33.

Knopf, G.K., and J. Kofman. 1998. Range sensor calibration using a neural network. Smart Engineering Systems: Neural Networks, Fuzzy Logic, Evolutionary Programming, Data Mining and Rough Sets. Proceedings of the Artificial Neural Networks in Engineering Conference (ANNIE'98), Vol. 8. St. Louis, Missouri: 1 November 1998-4 November 1998. C.H. Dagli, et al. New York: ASME Press. 491-496.

Kofman, J., and G.K. Knopf. 1998. Range sensing by an unconstrained and a continuously moving laser-scanner without sensor-head pose measurement. 2nd International Symposium on Intelligent Manufacturing Systems, IMS '98, Vol. II. Sakarya, Turkey: 6 August 1998-7 August 1998. G. Cagil, A.K. Turker, E. Oztemel, and H. Taskin. Sakarya University. 783-793.

Kofman, J., and G.K. Knopf. 1998. Registration and integration of narrow and spatiotemporally-dense range views. Vision Geometry VII. San Diego, California: 20 July 1998-22 July 1998. R.A. Melter, A.Y. Wu, and L.J. Latecki. SPIE Proceedings, Vol. 3454. 1998: SPIE. 99-109.

Kofman, J., D.I. Miller, G.K. Knopf, and A. Zecevic. 1998. Calibration and Measurement Accuracy of a Stereophotogrammetric System Using the Direct Linear Transformation. Proceedings of NACOB'98 The Third North American Congress on Biomechanics. Waterloo, Ontario: 14 August 1998-18 August 1998. University of Waterloo. 187-188.

 

MECHEFSKE, C.K.

Chen, Z., H. Ouyang, Y. Yang, Z. Wang, and C.K. Mechefske. 1998. Ongoing Machine Condition Monitoring and Diagnostics Related Research at The University of Western Ontario. COMADEM '98: Proceedings of the 11th International Conference on Condition Monitoring and Diagnostic Engineering Management, Vol. I. Tasmania, Australia: 9 December 1998-11 December 1998. B.T. Khunell, and B.K.N. Rao. Victoria, Australia: Monash University. 165-175.

Mechefske, C.K. 1998. Machinery Fault Detection and Diagnosis Using Fuzzy Logic. COMADEM '98: Proceedings of the 11th Canadian International Conference on Condition Monitoring and Diagnostic Engineering Management, Vol. I. Tasmania, Australis: 8 December 1998-11 December 1998. B.T. Kuhnell, and B.K.N. Rao. . Victoria, Australia: Monash University. 617-627.

Mechefske, C.K. Making "Mickey Mouse" Mandatory: Understanding the Importance of the Non- Technical Aspects of an Engineering Curriculum. FIE '98: 28th Annual Frontiers in Education Conference Proceedings, Vol. I. Tempe, Arizona: 4 November 1998-7 November 1998. Champaign, Illinois: Stipes Publishing L.L.C. Session S4A.

Mechefske, C.K. 1998. Objective Machinery Fault Diagnosis Using Fuzzy Logic. Mechanical Systems and Signal Processing 12 (6): 855-862.

Mechefske, C.K. 1998. Understanding the Importance of the Non-Technical Aspects of the Engineering Curriculum: Making "Mickey Mouse" Mandatory. Proceedings of the 11th Canadian Conference on Engineering Education. Halifax, Nova Scotia: 5 July 1998-7 July 1998. Dalhousie University. 161-167.

Wu, Y., C.K. Mechefske, B. Chronik, and B.K. Rutt. 1999. Acoustic Distribution with Gradient Coils in MR Imagers. Proceedings of the Canadian Medical and Biological Engineering Society. London, Ontario: 24 June 1999-26 June 1999. Canadian Medical and Biological Engineering Society. 28-30.

 

SHEN, J.

Li, X., and J. Shen. 1998. Absolute and Convective Instability of Cylindrical Liquid Jets in Co-Flowing Gas Streams. Atomization and Sprays 8: 45-62.

Li, X., and J. Shen. 1999. Experimental study of sprays from annular liquid jet breakup. Journal of Propulsion and Power 15 (1): 103-110.

Shen, J., and X. Li. 1998. Instability of cylindrical compressible gas jets in viscous liquid streams. Acta Mechanica 130 (1-2): 95-110.

 

SHINOZAKI, D.M.

Lu, Y., and D.M. Shinozaki. 1998. Deep penetration micro-indentation testing of high density polyethylene. Materials Science and Engineering A249: 134-144.

Pan, S., W. Liou, A. Shih, M. Park, G. Wang, S.P. Newberry, H. Kim, D.M. Shinozaki, and P.C. Cheng. 1998. Experimental System for X-ray Cone-Beam Microtomography. Microscopy and Microanalysis 4: 56-62.

Shinozaki, D.M., St. Lawrence, Y. Lu, and P.C. Cheng. 1998. Experimental Methods to Characterize Failure of Polymer-Metal Laminates. Proceedings of the 4th National Conference on Flexible Printed Circuits, IPC (Institute for Interconnecting and Packaging Electronic Circuits), Vol. 2. San Jose: 18 March 1998-19 March 1998. 89-97.

St. Lawrence, S., and D.M. Shinozaki. 1998. Micromorphology-dependent mechanical properties of syndiotactic polystyrene. Journal of Materials Science 33: 4059-4068.

Yan, R.J., A. Ajji, and D.M. Shinozaki. 1999. Mechanical properties of uniaxially oriented syndiotactic polystyrene. Journal of Materials Science 34: 2335-2344.

Yan, R.J., A. Ajji, and D.M. Shinozaki. 1998. Strength of oriented syndiotactic polystyrene. International Symposium on Orientation of Polymers: Application to Films and Fibres, SPE-RETEC. Boucherville, Quebec: 23 September 1998-25 September 1998. 385-391.

Yan, R.J., A. Ajji, D.M. Shinozaki, and M.M. Dumoulin. 1998. Uniaxial drawing and stress relaxation of syndiotactic polystyrene. Proceedings of the International Symposium on Orientation of Polymers, SPE-RETEC. Boucherville, Quebec: 23 September 1998-25 September 1998. 481-488.

Yan, R.J., A. Ajji, D.M. Shinozaki, W. Wang, and M.M. Dumoulin. 1998. Uniaxial drawing behavior of syndiotatic polystyrene. Proceedings of the 56th Annual Technical Conference, ANTEC. Atlanta, Georgia: 26 April 1998-30 April 1998. 1542-1545.

 

SINGH, A.V.

Singh, A.V. 1998. Linear and Geometrically Nonlinear Vibrations of Fiber Reinforced Laminated Plates and Shallow Shells. Mechanics of Composite Materials and Structures, Vol. IV. Troia, Portugal: 12 July 1998-24 July 1998. C.A. Mota Soares, C.M. Mota Soares, and M.J.M. Freitas. NATO Advanced Study Institute. 29-40.

 

STRAATMAN, A.G.

Gin, R., A.G. Straatman, and D.A. Steinman. 1999. Numerical Modelling of the Carotid Artery Bifurcation Using a Physiologically Relevant Geometric Model. 7th Annual Conference of the CFD Society of Canada Proceedings. Halifax, Nova Scotia: 30 May 1999-1 June 1999. J. Militzer. Halifax, NS: Dalhousie University. 5-49-5-54.

 

YAN, R.J.

Yan, R.J., A. Ajji, and D.M. Shinozaki. 1999. Mechanical properties of uniaxially oriented syndiotactic polystyrene. Journal of Materials Science 34: 2335-2344.

Yan, R.J., A. Ajji, and D.M. Shinozaki. 1998. Strength of oriented syndiotactic polystyrene. International Symposium on Orientation of Polymers: Application to Films and Fibres, SPE-RETEC. Boucherville, Quebec: 23 September 1998-25 September 1998. 385-391.

Yan, R.J., A. Ajji, D.M. Shinozaki, and M.M. Dumoulin. 1998. Uniaxial drawing and stress relaxation of syndiotactic polystyrene. Proceedings of the International Symposium on Orientation of Polymers, SPE-RETEC. Boucherville, Quebec: 23 September 1998-25 September 1998. 481-488.

Yan, R.J., A. Ajji, D.M. Shinozaki, W. Wang, and M.M. Dumoulin. 1998. Uniaxial drawing behavior of syndiotatic polystyrene. Proceedings of the 56th Annual Technical Conference, ANTEC. Atlanta, Georgia: 26 April 1998-30 April 1998. 1542-1545.

 

ZHANG, C.

Damodaran, V., G.W. Rankin, and C. Zhang. 1999. Effect of a moving boundary on pulsatile flow of incompressible fluid in a tube. Computation Mechanics 23 (1): 20-32.

Ishii, T., C. Zhang, and S. Sugiyama. 1998. Numerical Simulations of Highly Preheated Air Compustion in an Industrial Furnace. Journal of Energy Resources Technology 120 (Dec.): 276-284.

Xu, H., and C. Zhang. 1998. Study of the Effect of the Non-Orthogonality for Non-Stagered Grids - The Theory. International Journal for Numerical Methods in Fluids 28: 1265-1280.

Xu, H., and C. Zhang. 1999. Study of the Effect of the Non-Orthogonality for Non-Staggered Grids -- The Results. International Journal for Numerical Methods in Fluids 29: 625-644.

Zhang, C., T. Ishii, Y. Hino, and S. Sugiyama. 1998. The Numerical and Experimental Study of a Regenerative Furnace. Proceedings of 11th International Heat Transfer Conference, Vol. 7. Kyongju, Korea: 23 August 1998-28 August 1998. 361-366.