Leaders in Learning: Publications of Faculty & Staff

Chemical and Biochemical Engineering 2001-2002


Ariyapadi, S., R. Balachandar, and F. Berruti. 2001. Characterizing Spray Pulsations Using a Phase-Doppler Particle Analyzer. Industrial and Engineering Chemistry Research 40 (23): 5282-5290.

Copan, J., R. Balachandar, and F. Berruti. 2001. Droplet-Size - Velocity Characteristics of Sprays Generated by Two-Phase Feed Nozzles. Chemical Engineering Communications 184: 105-124.

Copan, J., N. Clarke, and F. Berruti. 2001. The Interaction of Single- and Two-Phase Jets and Fluidized Beds. Fluidization X. Kwauk. M., J. Li, and W.C. Yang. New York: Engineering Foundation. 77-84.

Gray, M.R., T. Le, W.C. McCaffrey, F. Berruti, S. Soundarajan, E. Chan, I. Huq, and C. Thorne. 2001. Coupling of Mass Transfer and Reaction in Coking of Thin Films of an Athabasca Vacuum Residue. Industrial and Engineering Chemistry Research 40 (14): 3317-3324.

Knapper, B., F. Berruti, J.R. Grace, H.T. Bi, and C.J. Lim. 2002. Hydrodynamic Characterization of Fluid Bed Cokers. Circulating Fluidized Bed Technology VII. J.R. Grace, J.-X. Zhu, and H.I. de Lasa. Ottawa, Ont.: Canadian Society for Chemical Engineering. 263-270.

Smith, M.T., F. Berruti, and A.K. Mehrotra. 2001. Thermal Desorption Treatment of Contaminated Soils in a Novel Batch Thermal Reactor. Industrial and Engineering Chemistry Research 40 (23): 5421-5430.


Bodin, S., C. Briens, M. Bergougnou, and T. Patureaux. 2002. Modeling of withdrawal wells and conical transitions in standpipe systems. Experimental validation. Powder Technology 124: 85-93.

Bodin, S., C. Briens, M. Bergougnou, and T. Patureaux. 2002. Standpipe flow modeling, experimental validation and design recommendations. Powder Technology 124: 8-17.

Maucci, E., C. Briens, R. Martinuzzi, and G. Wild. 2002. Improvement of liquid-solid and gas-liquid mass transfer in multiphase pulsing systems. Chemical Engineering & Processing 41: 29-33.

Revol, D., C.L. Briens, and J.M. Chabagno. 2001. The design of flights in rotary dryers. Powder Technology 121: 230-238.

Saberia, M., Y. Segonne, C. Briens, J. Bousquet, J. Chabagno, and O. Denizart. 2002. Blending of polymers in high speed, vertical mixers, development of a thermal tracer measurement procedure. Powder Technology 123: 25-32.

Segonne, Y., C. Briens, J. Chabagno, and J. Bousquet. 2001. Assessment of agitation and detection of deposits in mechanical solids mixers. Powder Technology 116: 69-75.


Briens, L., and C. Briens. 2002. Cycle Detection and Characterization in Chemical Engineering. AIChE Journal 48 (5): 970-980.


Guo, B., X. Hua, and A. Jutan. 2002. Generic Model Controller tuning for Chemical processes with input saturation. Canadian Journal of Chemical Engineering 80 (2): 275-280.

Xiong, Q., A.P. Jiang, and A. Jutan. 2002. Experimental investigation of subspace identification and LQ control of a pressure tank. ISA Transactions 41 (2): 203-213.

Xiong, Q., and A. Jutan. 2002. Grey-box modeling and control of nonlinear chemical processes. Chemical Engineering Science 57: 1027-1039.


Nakhla, G., J. Kochany, and A. Lugowski. 2002. Evaluation of PCB's Biodegradability in Sludges by Various Microbial Cultures. Environmental Progress 21 (2): 85-93.

Nakhla, G., and M. Niaz. 2002. Pilot-Scale in situ Bioremediation of Gasoline-contaminated Groundwater: Impact of Process Parameters. Environmental Progress 21 (1): 37-46.


Hoffman, M., J. Puskas, and K. Weiss. 2002. Real-time mid-IR monitoring of metathesis reactions by fiber optic FTIR spectroscopy. European Polymer Journal 38: 19-24.

Puskas, J., P. Antony, Y. Kwon, C. Paulo, M. Kovar, P. Norton, G. Kaszas, and V. Altstadt. 2001. Macromolecular Engineering via Carbocationic Polymerization: Branched Structures, Block Copolymers and Nanaostructers. Macromol. Mater. Eng. 286 (10): 565-582.


Duan, W.F., J.N. Zhang, W.X. Huang, Shi. Y.F., and J.X. Zhu. 2001. Study on the Derivative Reconstruction Method. Journal of Sichuan University 33 (5): 102-106.

Hong, J., and J.X. Zhu. 2002. Effect of Pipe Orientation on Dense-Phase Transport in Inclined Upward and Downward Flows. Chem. Eng. Communications 78 (2): 157-163.

Huang, W.X., Y.F. Shi, and J.X. Zhu. 2001. Investigation on Solids Holdups of FCC Particles in a 16m High CFB Riser. Petrochemical Technol. 30 (7): 534-537.

Huang, W.X., Y.F. Shi, and J.X. Zhu. 2001. Pressure Gradients and Flow Behaviours in a 16m High Gas-Solid Riser of CFB. Journal of Chemical Engineering of Chinese Universities 15 (2): 109-114.

Huang, W.X., Y.F. Shi, and J.X. Zhu. 2001. Solids Holdups of Gas-Solid Two-Phase Upward Flow in Fully Developed Region of CFB Riser. J. Chem. Ind. Eng. 52 (11): 963-968.

Lan, C., A.S. Bassi, J.X. Zhu, and A. Margaritis. 2002. Continuous Protein Recovery from Whey using Liquid-solid Circulating Fluidized Bed Ion-Exchange Extraction. AIChE Journal 48 (2): 252-261.

Li, J., J.X. Zhu, A.S. Bassi, and S.H. Kofman. 2001. Evaluation of Different Dental Materials using a Slugging Fluidized Bed. Powder Technology 118 (3): 275-284.

Pärssinen, J., and J.X. Zhu. 2001. Axial and Radial Solids Distribution in a Long and High-Flux CFB Riser. AIChE Journal 47 (10): 2197-2205.

Pärssinen, J., and J.X. Zhu. 2001. Particle Velocity and Flow Development in a Long and High-Flux Circulating Fluidized Bed Riser. Chemical Engineering Science 56 (18): 5295-5303.

Yan, A.J., S.V. Manyele, J.H. Pärssinen, and J.X. Zhu. 2002. The Interdependence of Micro and Macro Flow Structures under a High-Flux Flow. Circulating Fluidized Bed VII. J.R. Grace, J.X. Zhu, and H. deLasa. Ottawa: Canadian Society of Chemical Engineering. 357-364.

Yan, A.J., J.H. Pärssinen, and J. Zhu. 2002. Operating Experience of a High-Flux Circulating Fluidized Bed. Circulating Fluidized Bed VII. J.R. Grace, J.X. Zhu, and H. deLasa. Ottawa: Canadian Society of Chemical Engineering. 295-302.

Zhang, H., W.X. Huang, and J. Zhu. 2001. Gas-Solids Flow Behaviour: CFB Riser vs. Downer. AIChE Journal 47 (9): 2000-2011.