Daily Access Fee - $25 per day, maximum $ 200/month Access (key card), gowning (gloves, wipes, frocks, shoe covers, caps), all analytical equipment not listed below, and basic laboratory chemicals and reagents (acetone, methanol, isopropyl, ethanol, nitric acid, hydrofluoric acid, DI water), available labware and dishwashing, waste containers and disposal.

Nanofab Operator Service
- $50/hr. for service work and equipment training.
- FIB/SEM service - $140/hr
- SEM service $105/hr

1540XB SEM and FIB
- $55/hr SEM equipment charge
- $35/hr FIB surcharge in addition to SEM charges

1530 SEM and E-beam Lithography - $40/hr equipment charge

SEM Introductory Training
- $100

Spectroscopic Ellipsometer
-$10/hr, $10 minimum charge

Dektak profilometer
--$10/hr, $10 minimum charge

MA6 Mask Aligner
-$50/hr, $25 minimum charge

MJB3 Mask Aligner
$30/hr, $15 minimum charge

Deep Reactive Ion Etch- Alcatel - $150 for setup - $100/hr equipment charge

Reactive Ion Etch - STS - $50 per run

Plasma Enhanced Chemical Vapour Deposition (PECVD) - $100 per run

Metal Deposition (Standard metals)
-Osmium Coater -$10 per run
-E-beam evaporation - $50 per run (<1000 Ǻ metal ) plus $5 per 250 Ǻ (>1000 Ǻ metal )
-Surcharge for gold based on weight used and current cost per gram.
-Sputter Deposition - $25 per hour, $50 minimum

Film Spin Coating and Developing - $20 per substrate, includes cost of standard resists and developer

Oriel DUV Flood Exposure Source - $1.75 per 5 minutes OR $20 per hour

Dicing Saw - $50 for first hour, $25 each additional hour, $50 minimum

Access Card Replacement Fee - $10 fee for unreturned or lost access cards